Watts AERCO Edge [ii] User Manual

Edge [ii] Controller Operation Manual
SECTION 3: CALIBRATION
OMM-139_E • 8/25/2020 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page 61 of 196
SECTION 3: CALIBRATION
The Calibration screen provides a number of tools to calibrate various of the unit’s components.
It is accessed by pressing Calibration on the Main Menu.
Figure 3.0: Calibration Screen
This Section includes the following topics:
3.1: Assisted Combustion
3.2: Manual Combustion
3.3: Input/Output:
3.3.1: Temperature Sensors
3.3.2: O2 Sensor
3.3.3: Analog Inputs
3.3.4: Analog Outputs
3.4: Subsystems
3.4.1: Air Fuel Valve
3.4.2: Spark Monitor
3.5: Combustion Summary
WARNING:
Before starting the instructions in this section for the first time, you must ensure that the unit
has the latest Edge Controller firmware. Complete the instructions in Section 6.2.7: Firmware
Update to obtain and install the latest firmware.

Watts AERCO Edge [ii] Specifications

General

Brand	Watts
Model	AERCO Edge [ii]
Category	Controller
Language	English