Watts AERCO Edge [ii] User Manual

Edge [ii] Controller Operation Manual
SECTION 2: EZ SETUP
OMM-139_E • 8/25/2020 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page 24 of 196
Pressing Next takes you to the Select BAS Mode screen; skip to Section 2.4: Completing
the Installation for instructions.
Figure 2.2.1-9: Standalone – Space Heating: Space Heating Outdoor Reset Screen
2.2.2 EZ Setup: Standalone – DWH (Domestic Hot Water) Application
Complete these instructions only if you chose Domestic Hot Water at the end of Section 2.2.
Figure 2.2.2-1: Standalone – DHW: Select Your Boiler Application Screen
1. The Domestic Hot Water Operating Mode screen appears. Choose the DHW Operating
Mode (its square turns green) then press Next to go to that option’s screen:
• If you chose Constant Setpoint, proceed to Step 2.
• If you chose Remote Setpoint, skip to Step 3.
Figure 2.2.2-2: Standalone – DHW: DHW Operating Mode Screen

Watts AERCO Edge [ii] Specifications

General

Brand	Watts
Model	AERCO Edge [ii]
Category	Controller
Language	English