Watts AERCO Edge [ii] User Manual

Edge [ii] Controller Operation Manual
SECTION 4: DIAGNOSTICS
OMM-139_E • 8/25/2020 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page 75 of 196
SECTION 4: DIAGNOSTICS
The Diagnostics menu provides access to a number of tools you can use to diagnose a
suspected or observed fault. It is accessed by pressing Diagnostics on the Main Menu
Figure 4.0: Diagnostics Menu
This Section includes the following topics:
4.1: Manual Run
4.6: Comm & Network
4.2: Front Panel
4.6.1: IP Network
4.3: Analog Outputs and Relays
4.6.2: BAS
4.3.1: Relays
4.6.3: onAER
4.3.2: Analog Outputs
4.6.4: Smart Device
4.4: Subsystems
4.6.5: USB Storage
4.4.1: Air Fuel Valve Stepper Motor
4.7: Input/Output Summary
4.4.2: Blower
4.4.3: Ignition
4.5: System
4.5.1: Pre-Start Up
4.5.2: Versions
WARNING:
Before starting the instructions in this section for the first time, you must ensure that the unit
has the latest Edge Controller firmware. Complete the instructions in Section 6.2.7: Firmware
Update to obtain and install the latest firmware.

Watts AERCO Edge [ii] Specifications

General

Brand	Watts
Model	AERCO Edge [ii]
Category	Controller
Language	English