上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
6 / 131
1.3 Running Information Bar
It is used to show running status and alarms of the machine tool.
It includes the following:
• Report bar
• Alarm bar
1.3.1 Report Bar
It is shown as follows:
You can check the following:
• Current machining time
• Remaining machining time
• Current system status
• Current machining speed
• Current machining layer
• Statistics for machining
You can enable counting machining function by clicking Count.
1.3.2 Alarm Bar
It is shown as follows:
It is used to check alarm information.
To Next Page
Loading...
Need help?
General
