上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
118 / 131
9.4 Check System Logs
This operation is used to check different types of system logs and it is good for
troubleshooting.
To check system logs, do the following:
1. Click System → Log. Log dialog box pops up.
2. Optional: To refresh log information, click Refresh.
3. Check different types of system logs for troubleshooting:
– To show error logs, check Error. Logs with icon show in the dialog
box.
– To show warning logs, check Warning. Logs with icon show in the
dialog box.
– To show logs about running status, check Information. Logs with icon
show in the dialog box.
– To show system logs, check System. Logs with icon show in the dialog
box.
These kinds of logs are checked by default.
Once the log file exceeds 20M, the system automatically generates a backup log file
named NcStudio_xxxx.log under User folder and deletes the original one.
9.5 Check Online Documents
This operation is used to check information about NcEditor V12 Laser Cutting CNC
System and Weihong Company easily.
To check online documents, click Help and select one of the following:
• User Manual: introducing how to use the software of NcEditor V12 Laser
Cutting CNC System in details. It is for the machine tool users.
• Manufacturer Manual: introducing how to install and debug NcEditor V12
Laser Cutting CNC System in details. It is for the machine tool manufacturers.
• Shortcut Key: listing the shortcut keys in the software. See List of Shortcut Key
for details.
• Weihong Introduction: introducing Weihong Company briefly.
To Next Page
Loading...
