上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
16 / 131
2 Quick Start (in Sheet Cutting Configuration)
This section introduces the following operations for laser cutting in sheet cutting
configuration:
1. Return to the machine origin
2. Load a toolpath or draw an object
3. Calibrate capacitance
4. Set the workpiece origin
5. Find edges
6. Simulate machining
7. Execute machining
2.1 Return to the Machine Origin
Origin of the machine coordinate system (inherent coordinate system of a machine
tool), also called mechanical origin or home, is a fixed point assigned by designing,
manufacturing and debugging before the machine tool leaves factory.
This operation is used to adjust the machine coordinate of the machine tool, so as to
confirm the machining position is correct.
Before returning to the machine origin, ensure all servo alarms have been removed.
To Next Page
Loading...
