上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
17 / 131
To return to the machine origin, do the following:
1. Click Mach → Go Home → Go Home Setting. Go Home dialog box pops up:
The dialog box pops up after the software is started by default. If you need to
cancel the setting, uncheck The dialog pops up automatically when the
software is started.
2. Click one of the following:
– All Axes
Return all axes to the machine origin. Z-axis returns to the machine
origin firstly, then other axes return.
You can also return all axes to the machine origin by clicking in
machine control area.
To Next Page
Loading...
