上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
94 / 131
Result of ring cut shows as follows:
5.16 Do Clearing
This operation is used to clear some technics that have been set.
To do clearing, do the following:
1. Select the target objects.
2. Do one of the following:
– Click Object → Clear, and select clearing items.
– Right click and select Clear, and select clearing items:
• Lead line
• Kerf compensation
• Cooling point
• Micro joint
• Chop
• Ring cut
To Next Page
Loading...
