上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
95 / 131
6 Layer Function
As a core function, layer function is used to set general parameters and technics for
a layer. Characteristics of layer function are as follows:
• Combine layer technics and general parameters, making it easy to use.
• With layer technic setting, better cutting effect and higher efficiency can be
achieved by setting common parameters, such as laser power, machining speed
and so on.
This section introduces the following information about layers:
• Interface overview
• Layer operations
• Layer operation instruction
– Piercing methods
– General parameters
– Layer technic parameters
To specify and set a layer, do the following:
1. Select the target objects.
2. Click the target layer in drawing toolbar：
The selected objects turn into the color of the layer.
Each layer has 8 colors and can own different layer technics. Objects with the
same color share the same technics.
3. To open Layer Setting dialog box, do one of the following:
– In drawing toolbar, click .
– In menu bar, click Object → Layer Setting.
Layer Setting dialog box pops up.
See Interface Overview for details.
4. Set general parameters.
See General Parameters for details.
To Next Page
Loading...
