上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
4 / 131
1.1 Toolbar
It is used to show frequently used instructions.
It differs in the number of selected objects:
• If no object is selected, it shows the following:
– : New
Used to create a new file.
– : Import
Used to import a G/NC/DXF/DWG/PLT/ENG file.
– : Open
Used to open a NCE file.
– : Save
Used to save a toolpath file.
A new file is saved as a NCE file.
– : Undo
Used to cancel the last operation.
– : Redo
Used to recover canceled operations.
– : Show order
Used to show/hide the machining order.
– : Show direction
Used to show/hide the machining direction.
– : Hightlight unclosed objects
Used to hightlight all unclosed objects.
– : Clear trace
Used to clear the machining trace.
To Next Page
Loading...
