上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
81 / 131
5.7 Set Scan Cutting
This operation is used to replan a toolpath to find the most efficient path to execute
machining by controlling laser on/off, so as to avoid unnecessary tool lifting and
feeding and improve machining efficiency.
According to the object type, this operation includes the following:
• Set scan cutting for lines
• Set scan cutting for circles
• Set scan cutting for tiny circles in advertisement text
After setting scan cutting, all selected objects turn into a group.
5.7.1 Set Scan Cutting for Lines
To set scan cutting for lines, do the following:
1. Select the target lines.
2. Click Object → Scan Cut → Line Scan. Line Scan dialog box pops up:
3. Select the start position for cutting, Max Scan Space and Collinear Tolerance.
①: Collinear Tolerance ②: Max Scan Space
To Next Page
Loading...
