上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
7 / 131
You can do the following:
• To check causes and solutions of alarms, click Warnings.
• To check alarm type, click .
1.4 Window Display Buttons
It is used to show/hide the following windows:
• Sheet cutting configuration: machine control area.
• Tube cutting configuration: machine control area and 3D view area.
1.5 Machine Control Area
It includes the following:
• Axis coordinate display area
• Feed override control bar
• Manual control area
• Common operation buttons
• Machining control area
• Machining selection area
1.5.1 Axis Coordinate Display Area
It is used to show the following:
To Next Page
Loading...
Need help?
General
