WEIHONG NcEditor V12 - 9 System Management Operations; Save Set Parameters and Generate an Installation Package; Back up and Restore Parameters; Switch System Language

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
117 / 131
9 System Management Operations
This section introduces the following operations for system management:
• Save set parameters and generate an installation package
• Back up and restore parameters
• Switch system language
• Check system logs
• Check online documents
• Check daily tips
• Check statistics
• Count machining
• Set cycle machining
• Register the software
9.1 Save Set Parameters and Generate an Installation Package
This operation is used to save the set parameters and generate an installation
package, so as to save a fixed software version.
To save set parameters and generate an installation package, click System → Make
Param Backup Installer.
The system backs up the software and parameters into a ZIP file and puts in under
the default directory D:\Weihong\Setup.
9.2 Back up and Restore Parameters
This operation is used to back up parameters by saving them as a BIN file for later
use and restore the backup parameters, so as to avoid to setting them again.
To back up and restore parameters, click System and select one of the following:
• Back up Parameters: save parameters as a BIN file.
• Restore Parameters: import the backup parameter file and restart the
software to make the retoring effective.
9.3 Switch System Language
This operation is used to switch system language among Chinese, English, Korean,
Russian and Japanese.
To switch system languages, click System → Language and select the target
language.
Restart the software to make the operation effective.