上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
119 / 131
9.6 Check Daily Tips
This operation is used to check functions and operations which are listed in
software operation order.
To check daily tips, do the following:
1. Click Help → Daily Tips and check a tip in Daily Tips dialog box.
2. To check the previous/next tip, click Prev/Next.
If Show daily tips on startup is checked, Daily Tips dialog box pops up
automatically when the software is started.
9.7 Check Statistics
This operation is used to check the statistics for machining or charge for it.
To check statistics, do the following:
1. To open Statistics Information dialog box, do one of the following:
– In report bar, click Report.
– In menu bar, click Mach → Show Statistics.
Statistics Information dialog box pops up.
2. Check the statistics for machining.
3. Optional: To charge for the machining, do the following:
1. Check the target items and click Charging.
2. Enter the unit price of each item and click Calculate.
The system automatically calculates total cost of cutting.
To Next Page
Loading...
