上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
38 / 131
2. To specify a text box, click and drag the mouse.
3. Enter text in the input box.
During entering, you can press Ctrl+Enter for line feed.
4. Press Enter.
4.2 Auxiliary Editing Operations
4.2.1 Execute View Operations
This operation is used to do the following without changing the actual size and
coordinate of the object:
• Pan the view
• Zoom in/out the view
• Zoom in the selected area
• Fit to window
Pan the View
This operation is used to reposition the drawing window by selecting a base point
and a second point for new position.
To pan the view, do one of the following:
• Press the mouse wheel and drag the mouse at the same time to move the view
to the target position.
• To use panning function, do the following:
1. To use panning tool, do one of the following:
• In drawing toolbar, click .
• In menu bar, click View → Pan.
2. Press the left mouse button to move the view to the target position.
If you need to stop panning the view, right click or press Esc.
Zoom in/out the View
This operation is used to do one of the following:
• Zoom in the view: make the view appear larger.
• Zoom out the view: make the view appear smaller.
To Next Page
Loading...
