上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
39 / 131
To zoom in/out the view, do the following:
1. To use zooming function, do one of the following:
– In drawing toolbar, click .
– In menu bar, click View → Zoom.
2. Do one of the following:
– To zoom in the view, do one of the following:
• Scroll up the mouse wheel.
• Press the left mouse button and drag the mouse up.
• Press + on the keypad.
– To zoom out the view, do one of the following:
• Scroll down the mouse wheel.
• Press the left mouse button and drag the mouse down.
• Press - on the keypad.
If you need to stop zooming, right click the mouse or press Esc.
Zoom in the Selected Area
This operation is used to zoom in part of the object to drawing window size.
To zoom in the selected area, do the following:
1. Do one of the following:
– In drawing toolbar, click .
– In menu bar, click View → Zoom by Rect.
2. Left click on the drawing window, drag the mouse to form a rectangle, and left
click again. The area formed by the rectangle zooms in.
Fit to Window
This operation is used to resize objects and make them fit to the drawing window on
the premise of showing all objects.
To adjust to the best view, do one of the following:
• In drawing toolbar, click .
• In menu bar, click View → Best View.
• On keypad, press *.
To Next Page
Loading...
