上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
109 / 131
Width
Actual sheet width.
Height
Actual sheet height.
5. Click Setting. Setting dialog box pops up:
6. Modify the following:
Material Margin and Part Space
Distance between parts and the edge of sheet, and distance between parts.
If the space between parts is zero, it is suggested to share an edge so as to avoid
cutting the same edge repeatedly during machining.
Start Corner
Position to start nesting.
Nest Direction
Nesting direction.
It includes vertical direction and horizontal direction.
7. Click Execute and preview nesting effect in the right area. Nesting results
(sheet utilization) show in Sheets area.
To Next Page
Loading...
