上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
12 / 131
• : Go forward
Used to control the machine tool to move along the toolpath towards positive
direction.
• : Go backward
Used to control the machine tool to move backward along the toolpath towards
negative direction.
• : Laser
Used to turn on laser valve.
Laser valve is turned on automatically when machining starts.
• : Blow
Used to turn on blow valve.
Blow valve is turned on automatically when machining starts and is turned off
after set time.
• : Follow-up
Used to turn on follow-up valve to keep the distance between the nozzle and
the workpiece surface.
Follow valve is turned on automatically when machining starts.
• : Burst
Used to turn on laser valve for a certain time.
Laser valve keeps on for the set burst time until it is turned off automatically.
• : Shutter
Used to turn on laser shutter manually.
To eject laser light, first, turn on laser shutter; then, open laser valve.
To Next Page
Loading...
