上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
19 / 131
• Insert
Insert a G/NC/DXF/DWG/PLT/ENG/NCE file.
If a toolpath already exists in drawing window, the inserted
toolpath shows together with the original one.
• To draw an object, do one of the following:
– Manually draw an object.
See Drawing Operations for details.
– Call an object saved in the gallery.
Click Draw → Gallery, select the target object and set its size and
position in Gallery dialog box. The object is loaded in drawing window
automatically.
After loading a toolpath or drawing an object, you can do the following:
• Edit and preliminarily process the object.
See Preprocessing Operations and Basic Editing Operations for details.
After editing the object, you can click File → Export File to save the toolpath as
a DXF/DWG file, so as to use the toolpath repeatedly.
• Set technics and layers.
See Technics and Layer Function for details.
After executing the above operations, you can click File → Save in menu bar or in
drawing toolbar to save the toolpath, so as to execute machining.
The imported toolpath is saved as a NCE file under NceFiles folder on the desktop. If
there is no such folder, the system creates one automatically.
To Next Page
Loading...
