上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
28 / 131
During machining, you can do the following:
• To stop machining, do one of the following:
– In machine control area, click .
– In menu bar, click Mach → Mach Control → Stop.
– On the keyboard, press F11.
The machine tool stops machining and ends the machining task. The system
enters idle status.
• To resume machining from the exact interrupted position when the power
interruption or e-stop occurs and the workpiece origin is secured, do one of the
following:
– In machine control area, click .
– In menu bar, click Mach → Mach Control → Breakpoint Resume.
– On the keyboard, press Shift+F9.
To Next Page
Loading...
