上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
42 / 131
– Select Tiny: select all objects within the target size.
– Select by Layer: select all objects of the same layer.
– Select by Type: select all objects of the same type.
– Select by Inner-Outer: select nested objects.
– Select Similar: select all the same objects.
4.2.4 Measure Distance
This operation is used to check distance, X-axis/Y-axis offset and the vector angle
between two points.
To measure distance, do the following:
1. To use measurement function, do one of the following:
– In drawing toolbar, click .
– In menu bar, click Object → Measure.
– In drawing window, right click and select Measure.
2. Left click to select the start point for measuring, and move the cursor to select
the end point.
The measurement result shows near the end point.
To Next Page
Loading...
