上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
64 / 131
4.4.2 Delete Overlapping Objects
This operation is used to delete overlapping objects that are similar.
To delete overlapping objects, do the following:
1. Select the target objects.
2. Click Object → Shape Pre-process → Delete Overlaps. Delete Overlaps
dialog box pops up.
3. Enter tolerance.
The system automatically deletes similar objects within the tolerance and saves
one object.
4.4.3 Delete Self-overlapping Lines
This operation is used to delete self-overlapping lines on an object.
Diagram of self-overlapping lines is as follows:
To delete self-overlapping lines, do the following:
1. Select the target lines.
2. Click Object → Shape Pre-process → Delete Selfoverlaps. Delete Self-
overlaps dialog box pops up.
3. Enter tolerance.
The system automatically deletes self-overlapping lines within the tolerance
and saves one line.
To Next Page
Loading...
