上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
74 / 131
5.3.2 Change the Machining Direction of Closed Objects
To change the machining direction of closed objects, do the following:
1. Select the target closed objects.
2. To open Set dialog box, do one of the following:
– In menu bar, click Object → Mach Direction → Set.
– In drawing window, right click and select Mach Direction → Set.
Set dialog box pops up:
3. Select the machining direction.
4. Optional: To set the machining direction without changing the direction of
objects in a group, check Skip Groups.
To Next Page
Loading...
