上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
90 / 131
Micro Joint dialog box pops up:
3. In Auto area, select a micro joint method and set related parameters.
4. Optional: Check Skip Tiny Objects and set perimeter. The tiny objects within
the set perimeter are not joint.
5. Optional: If the system is in Lambda 5E configuration, check High Speed
Micro Joint to execute micro joint without turning on the laser at the micro
joint positio. The cutting head keeps moving without slowing down.
Example
Select micro joint by count and set count as 2.
The system automatically executes micro joint as follows:
To Next Page
Loading...
