WinGD RT-flex50DF - Cylinder Lubricating System

Maintenance
7218−1/A1
Winterthur Gas & Diesel Ltd.
1/ 6
Cylinder Lubricating System
1. Cylinder Lubrication System 1.......................................
1.1 Cylinder Lubrication System − Operate 1.......................
1.2 Function Check 3.............................................
2. Cylinder Lubrication Pump 3........................................
2.1 Checks 3.....................................................
3. Cylinder Lubricating System − Bleed 4...............................
3.1 Cylinder Lubricating Pump 4..................................
3.2 Oil Pipes 4...................................................
4. Duplex filter 5......................................................
4.1 Clogged Filter Element − Replace 5............................
4.2 Filter Element − Clean 5.......................................
1. Cylinder Lubrication System
For more data about the cylinder lubrication system, refer to the Operation Manual,
7218−1.
1.1 Cylinder Lubrication System − Operate
For more data, refer to the Operation Manual, 4002−2, paragraph 3.2 and paragraph
3.21.
1) In the LDU-20, get the MAIN page.
2) In the navigation menu, select Cylinder Lubrication.
3) In the CYL. LUBRICATION page, field Manual lub. Cyl. #, select the applicable
cylinder number.
4) If necessary, change the number of lube pulses (in the range 0 to 200) in field
Num. Of Inj..
Note: You can operate the 4/2-way solenoid valve (8, Fig. 1) to release manually
one lube pulse.
2016