Maintenance
Group3
Winterthur Gas & Diesel Ltd.
1/ 3
Crankshaft, Connecting Rod and Piston Group 3
Crankshaft: Crank Deflection − Measure 3103−1/A1.................................................
Vibration Damper
Inspection (GEISLINGER Vibration Damper) 3130−1/A1............................................
Axial Damper: Disassemble and Assemble 3140−1/A1................................................
Turning Gear: Teeth and Screwed Connections Check 3206−1/A1.....................................
Crankcase: Work Platform 3301−1/A1..............................................................
Top Platform: Configuration of Lifting Tools 3301−2/A2...............................................
Connecting Rod
Loosening and Tensioning the Connecting Rod Studs 3303−1/A1....................................
Bottom End Bearing − Removal, Inspection and Installation 3303−2/A2...............................
Top End Bearing − Removal and Installation 3303−3/A2.............................................
Removal and Installation 3303−4/A2..............................................................
Top End Bearing − Bearing Cover Removal and Installation
3303−5/A2...............................
Crosshead
Clearances 3326−1/A1.........................................................................
Crosshead Pin − Removal and Installation 3326−2/A2..............................................
Piston
Removal and Installation 3403−1/A1..............................................................
Changing the Compression Shims 3403−2/A1.....................................................
Disassemble and Assemble 3403−3/A1...........................................................
Top Surface Check 3403−4/A1...................................................................
Piston Rings and Ring Grooves: Rate of Wear 3425−1/A1.............................................
Piston Cooling and Crosshead Lubrication: Inner Pipe − Removal and Installation 3603−1/A1...........
Winterthur Gas & Diesel Ltd. RT-flex50DF / MM / 2016