Maintenance
3206−1/A1
Winterthur Gas & Diesel Ltd.
1/ 2
Teeth and Screwed Connections Check
1. General
Before you operate the turning gear (1, Fig. 1) you must do a check of the condition of
the tooth flanks on the pinion (2) and the flywheel (3). Also you must make sure that
lubricant is applied to these components.
For maintenance of the turning gear, refer to the instructions given in the supplier
documentation.
2
013.051/05
3
1
Fig. 1
2016
Turning Gear
To Next Page
Loading...