Connecting the printer to a non-RJ11 wall jack
1. Connect one end of the telephone cable to the line port of the printer.
2. Connect the other end of the cable to the RJ11 adapter, and then connect the adapter to the wall jack.
3. If you want to connect another device with a non-RJ11 connector to the same wall jack, then connect it
directly to the telephone adapter.
Connecting the printer to a wall jack in Germany
The German wall jack has two kinds of ports. The N ports are for fax machines, modems, and answering machines.
The F port is for telephones. Connect the printer to any of the N ports.
1. Connect one end of the telephone cable to the line port of the printer.
2. Connect the other end of the cable to the RJ11 adapter, and then connect the adapter to an N port.
3. If you want to connect a telephone and answering machine to the same wall jack, then connect the devices as
shown.
CONNECTING TO A DISTINCTIVE RING SERVICE
A distinctive ring service lets you have multiple telephone numbers on one telephone line. Each telephone number is
assigned a different ring pattern.
1. From the home screen, touch SSeettttiinnggss > FFaaxx > FFaaxx SSeettuupp > FFaaxx RReecceeiivvee SSeettttiinnggss > AAddmmiinn CCoonnttrroollss >
AAnnsswweerr OOnn.
2. Select a ring pattern.
Xerox
®
C235 Color Multifunction Printer User Guide 41
Set Up, Install, and Configure
To Next Page
Loading...
Need help?
General
