October 2012
8-25
ColorQube 8570/8870 Service Manual
Print Process
Theory of Operation
Xerox Internal Use Only - Revised, 3rd Revision
2. Park/ Sleep Position (22.3 degrees): Allows the wiper to clear the Printhead in order to
be in the Wipe Printhead position, and also allow the Printhead be parked for shipping. In
this position, the Printhead tilt arm/ follower is engaged at the Park position of the Tilt
Cam.
Figure 9 Park/ Sleep Position
3. Wipe Position (12 degrees): The Printhead tilt arm/ follower is engaged with the tilt cam,
and the head overload spring contact is engaged with the overload spring-plate to provide
the correct force for the wiper.
Figure 10 Wipe Position
To Next Page
Loading...
