5-8 Phaser 4500 Service Manual
Note
The operating environment of the printer is from 41 degrees F (5 degrees C) at
15% relative humidity to 95 degrees F (35 degrees C) at 85% relative humidity.
The fusing performance of the printer varies according to the environment.
■ A cold environment affects the warm-up time.
■ The weight (lb./gsm) or composition (such as rag content) of the paper or
transparency affects the fusing of prints.
■ High humidity has an adverse effect on the fusing of prints.
Actions and Questions Yes No
Rub the image three times at the marked check points with a
soft cloth or tissue. the image should not lift off of the surface
of the print.
Does the fusing quality of the image appear acceptable?
Go to
“Resolution”
on page 5-9.
Go to
“Unfused
Image” on
page 5-32.
To Next Page
Loading...
Need help?
General