FRU Disassembly 8-37
1. Remove the 150-Sheet Feeder Assembly (page 8-18).
2. Remove the 550-Sheet Feeder Assembly (page 8-31).
3. Remove the six screws (gold tapping, 8 mm) that attach the Tie Plate to the Out
Chute, and remove the Tie Plate from the Out Chute.
4. Unplug the connector (P/J247) of the Feed Clutch from the Tray 2 Harness
Assembly.
5. Remove the E-ring that secures the Feed Clutch, and slide the assembly off the
Feed Shaft.
To Next Page
Loading...
Need help?
General