FRU Disassembly 8-51
4. Remove the Motor Cover (page 8-67).
5. Remove the LVPS Shield Plate (page 8-75).
6. Remove the Print Cartridge Left Guide (page 8-49).
7. Spread the loops on the Print Cartridge Guide Cover to release the hooks in the
Print Cartridge Left Guide, Then remove the Print Cartridge Guide Cover
together with the Fuser Harness Assembly.
Caution
The loops of the Print Cartridge Left Guide are fragile and can easily break if
spread too far. Spread the loops only enough to release the hooks.
To Next Page
Loading...
