8-70 Phaser 4500 Service Manual
1. Remove the Print Cartridge and Paper Cassettes.
2. Remove the LVPS Shield Plate (page 8-75).
3. Unplug the Main Motor cable (J43) from P43 on the LVPS.
4. Remove the Motor Cover (page 8-67).
5. Remove the three screws (gold machine, 6 mm) that attach the Main Motor to the
frame.
Note
The screws that attach the Main Motor to the frame are accessed through the
cutouts at the edge of the Main Motor PWBA; they are not the screws that
attach the Main Motor PWBA to the motor.
6. Remove the Main Motor.
To Next Page
Loading...
Need help?
General