Xerox Phaser 4500 Service Manual

FRU Disassembly 8-77
1. Remove the Paper Exit Rear Door (page 8-5).
2. Remove the Rear Cover (page 8-6).
3. Remove the Left Cover (page 8-9).
4. Disconnect the harnesses from the connectors (P/J101, P/J102 and P/J103) on the
Exit Motor PWBA.
5. Remove the two screws (silver, 6 mm) that attach the Exit Motor PWBA to the
frame.
6. Remove the Exit Motor PWBA.

Xerox Phaser 4500 Specifications

General

Brand	Xerox
Model	Phaser 4500
Category	Printer
Language	English