8-114 Phaser 4500 Service Manual
Note
When handling the Retard Roller, avoid touching the rubber surfaces of the roller.
Removal
1. Pull out the 550-Sheet Paper Cassette from the optional 550-Sheet Paper Feeder.
2. Release the hooks that secure the Retard Holder to the 550-Sheet Paper Cassette
using a screwdriver or similar tool.
3. Lift the Retard Holder up in the direction of the arrow, and remove it.
4. Release the hook that secures the Retard Roller, and pull it out from the Retard
Shaft.
Note
You can also remove the Retard Roller by pushing down the Retard Holder.
Replacement
1. Install the Retard Roller to the Retard Shaft, and secure the Retard Roller with
the hook. Be sure that the hook of the Retard Roller seats in the Retard Shaft
groove.
2. Move the Retard Holder in the opposite direction of the arrow, and install it to the
550-Sheet Paper Cassette.
Note
After installing, make sure the Retard Holder comes back to the former
position with the spring force of the Retard Spring.
3. Install the 550-Sheet Paper Cassette to the optional 550-Sheet Paper Feeder.
To Next Page
Loading...
Need help?
General