60H5E11
1
Features and benefits
Hour meter
A hour meter is incorporated for easier control of interval time for the periodic maintenance.
As the main switch is turned on, all segments light up for 2 seconds to check that the Light Emitting
Diode is not failed.
Then, the meter indicates the total of hours which the engine has been run since manufacture.
The indicated hour is the accumulated time detected by the pulse signal from the lighting coil.
The accumulated hour is held forever, and cannot reset.
Identification / Features and benefits
60H10010
1-6
Hour meter
Rectifier
Regulator
Battery
Fuse
Main
switch
Power source (Y)
Grand (B)
Pulse
(G/W)
Lighting
coil
Flywheel magnet
(G)
(B)
Hour meter
Wiring diagram
(B)
G/W
G
Y
B
R
: Green/White
: Green
: Yellow
: Black
: Red
(R)
To Next Page
