60H5E11
6
AA
AA
6-24
Installing the water pump
1. Install the gasket 1, the dowels 2, and
the outer plate cartridge 3.
60h60520
2. Install the Woodruff key 4 into the drive
shaft.
3. Install the impeller 5 after aligning it with
the Woodruff key.
60h60530
NOTE:
• Align the groove on the impeller with the Woo-
druff key.
• Apply Yamaha grease A on the sliding face
between the impeller and the outer plate car-
tridge.
4. Install the O-ring into the water pump hous-
ing assembly 6, and install the water pump
housing on the lower case.
60h60540
NOTE:
To install the water pump housing, apply
Yamaha grease A to the inner face of the wa-
ter pump housing assembly, and then turn the
drive shaft clockwise while pushing down the
pump housing.
Installing the speedometer hose
1. Apply Yamabond 4 to the speedometer
hose, and tighten it.
60h60550
Assembling the lower unit (regular rotation model)
To Next Page
