60H5E11
Lower unit
LOWR
Ring nut:
145 N • m (14.5 kgf • m, 105 lb • ft)
T
R
.
.
6-23
10. Install the shift rod 7 assembly, and tighten
the bolt.
60h60480
11. Install the shim(s), washer, and propeller
shaft housing assembly.
60h60490
12. Align the key way, and install the key.
13. Install the claw washer, and tighten the ring
nut.
60h60500
14.Make sure that the shifting mechanism
works properly.
60h60510
NOTE:
Change the shift rod position to forward, to re-
verse, and to neutral. Make sure that propel-
ler shaft rotating direction is correct in forward
and in reverse. Also make sure that the posi-
tion is correct in neutral.
15. Bend one of the claw washer tabs toward
yourself.
60h60515
Ring nut wrench 8:
90890-06512
Ring nut wrench extension 9:
90890-06513
Shift rod push arm 0:
90890-06052
To Next Page
