60H5E11
GEN
INFO
General information
Larger mating face
Bearing with 18 rollers
Silver plating
Identification mark
Carburizing and quenching
Connecting rod and bearings
Connecting rod
A process of the carburizing and quenching has been given to the inside of the small end to increase
the strength.
The small end bearing has been given 18 rollers, adding one roller from the previous model, to
increase the durability.
The mating face of the big end bearing has been given a large area to increase the rigidity after
assembling the bearing cap, which increases the rigidty.
Also, a silver plating (30-40µ) has been given to the outside portion of the big end to increase the less
friction.
60H10050
1-9
To Next Page
