Yamaha 200A - Page 111

60H5E11
5
A
5-38
3. Install the cylinder head cover.
60H50750
NOTE:
Tighten the cylinder head cover bolts to the
specified torque in two stages and in the se-
quence shown.
4. Install the thermostat and the thermostat
cover.
60H50760
NOTE:
Tighten the thermostat cover bolts to the speci-
fied torques in two stages and in the sequence
shown.
Spark plug : 25N • m(2.5kgf • m, 18 ft • lb)
T
R
.
.
Cylinder head cover bolt:
1st : 4 N • m (0.4 kgf • m, 3 ft • lb)
2nd : 8 N • m(0.8 kgf • m, 6 ft • lb)
T
R
.
.
Thermostat cover bolt:
1st : 4 N • m(0.4 kgf • m, 3 ft • lb)
2nd : 8 N • m(0.8 kgf • m, 6 ft • lb)
T
R
.
.
5. Install the thermoswitch.
60H50770
6. Install the spark plugs.
Piston, Connecting rod