Yamaha 200A - Page 168

60H5E11
Lower unit
LOWR
Pinion nut:
93 N • m(9.3 kgf • m, 69 lb • ft)
T
R
.
.
Ring nut:
145 N • m (14.5 kgf • m, 105 lb • ft)
6-51
Drive shaft holder 6 5: 90890-06520
Pinion nut holder 6: 90890-06505
Socket adapter 3 6: 90890-06508
Ring nut wrench 7: 90890-06512
Ring nut wrench extension 8:
90890-06513
12. Install the shift rod assembly, and tighten
the bolt.
60h61480
13. Align the key way, and install the key.
14. Install the claw washer, and tighten the ring
nut.
60h61500
9. Tighten the pinion nut.
60h60460
10. Install the slide shift to the propeller shaft.
11. Install the shim(s), the propeller shaft and
the propeller shaft housing assembly.
60h61470
NOTE:
Set the dog clutch in neutral position.