60H5E11
Lower unit
LOWR
NOTE:
When measuring the reverse gear backlash,
turn the shift rod push arm towards the reverse
position C with force.
14. Add or remove shim(s) if out of specifica-
tion.
15. Remove the special service tools, and then
install the water pump assembly.
Available shim thickness:
0.10, 0.12, 0.15, 0.18, 0.30, 0.40, 0.50
Reverse gear backlash M
Shim thickness(mm)
Less than To be decreased by
0.98 mm (0.0386 in) (1.14-M) x 0.72
More than To be increased by
1.30 mm (0.0512 in) (M-1.14) x 0.72
M : Measurement
6-63
To Next Page
