60H5E11
Power unit
POWR
Valve bending limit : 0.2 mm(0.08in)
Valve stopper height :
6.5 mm (0.26in)
5-19
5. Check the reed valves for bending. Replace
them if the bending exceeds the specified
limit.
60H50220
6. Measure the valve stopper height. Replace
the stopper if the height exceeds the speci-
fied limit.
60H50230
7. Install the reed valves.
60H50240
NOTE:
Use new gaskets.
To Next Page
Loading...
