YASKAWA E-V-MD Series - Page 143

8 Adjustments
8.1.3 Monitoring Operation during Adjustment
8-10
 Transferring Data
The message remains until the set trigger conditions are met. Click Stop to stop waiting for the trigger
Dialog Box While Transferring Data
Once the trigger condition is satisfied, the SERVOPACK starts transferring data to the SigmaWin+. When the
data transfer is completed, the Trace main window appears.
Note 1. The trigger sometimes cannot be detected in less than 2ms due to the relationship of the detection period.
2.
If the sampling time is lengthened, SigmaWin+ may continue to wait for the trigger even after the trigger has
been applied. SigmaWin+ waits because data for the sampling time is saved in the SERVOPACK after the trigger
has been applied.