YASKAWA LA500 - Write Backed-Up Parameters to the Drive; Verify Keypad Parameters and Drive Parameters

Startup Procedure and Test Run
4
4.9 Keypad Operation
YASKAWA SIEPYEULA5001C LA500 Technical Manual 103
Figure 4.24 How to Save Backed-up Parameters
Push and hold to go back to the frequency reference screen.
◆ Write Backed-up Parameters to the Drive
Show the frequency reference screen in advance.
Note:
Push and hold to go back to the frequency reference screen from any screen.
Use these steps to write the parameters backed up in the keypad into a different drive.
Note:
• Make sure that you stop the drive before you restore the backed-up parameters.
• The drive does not accept Run commands while it is restoring parameters.
Figure 4.25 Writing backed up parameters
Push and hold to go back to the frequency reference screen.
◆ Verify Keypad Parameters and Drive Parameters
Show the frequency reference screen in advance.
Note:
Push and hold to go back to the frequency reference screen from any screen.