YASKAWA LA500 - Model Specifications (Three-Phase 400 V Class)

Specifications
10
10.2 Model Specifications (Three-Phase 400 V Class)
YASKAWA SIEPYEULA5001C LA500 Technical Manual 225
10.2 Model Specifications (Three-Phase 400 V Class)
Table 10.2 Ratings (Three-Phase 400 V Class)
Model Duty Rating 4009 4015 4018 4024 4031 4039 4045
Maximum Applicable Motor
Output
*1
(kW)
HD 4.0 5.5 7.5 11.0 15.0 18.5 22.0
Maximum Applicable Motor
Output
*1
(HP)
HD 5 10 10 15 20 25 30
Input
Rated Input
Current (A)
HD 10.4 15 20 29 39 50.5 59.7
Output
Rated Output
Capacity
*2
(kVA)
HD 7 11.3 13.7 18.3 23.6 29.7 34.3
Rated Output
Current (A)
HD 9.2 14.8 18.0 24.0 31.0 39.0 45.0
Overload Tolerance
• HD: 150% of the rated output current for 60 seconds, or 165% for 30 seconds. The permitted frequency of overload is
one time each 10 minutes.
Carrier Frequency
HD: 8 kHz without derating the drive capacity.
Derate the drive capacity to use values to 15 kHz maximum.
Maximum Output Voltage
Three-phase 380 V to 480 V
Note:
The maximum output voltage is proportional to the input voltage.
Maximum Output Frequency
• V/f, OLV: 120 Hz
Measures for
Harmonics
DC reactor External options
Braking Device Braking Transistor Standard internal characteristics
EMC Filter
EMC Filter
IEC61800-3
Factory option
Models 4xxxE: Category C2 (Conducted emission)
Power supply
Rated Voltage/Rated Frequency Three-phase AC power supply 380 V to 480 V at 50/60 Hz
Permitted Voltage Fluctuation -15% to +10%
Permitted Frequency Fluctuation ±5%
Input Power
(kVA)
HD 9.5 14 18 27 36 47 55
*1 The maximum applicable motor output complies with 380 V motor ratings as specified in Annex G of IEC 60947-4-1. The rated
output current of the drive output amps must be equal to or more than the motor rated current.
*2 The rated output capacity is calculated with a rated output voltage of 440 V.