YASKAWA LA500 - Delete Parameters Backed up to the Keypad

4.9 Keypad Operation
104 YASKAWA SIEPYEULA5001C LA500 Technical Manual
This procedure verifies that the parameter setting values that were backed up in the keypad agree with the
parameter setting values in the drive.
Note:
• Make sure that you stop the drive before you examine parameters.
• The drive does not accept Run commands while it is restoring parameters.
Figure 4.26 Verify Keypad Parameters and Drive Parameters
Push and hold to go back to the frequency reference screen.
◆ Delete Parameters Backed Up to the Keypad
Show the frequency reference screen in advance.
Note:
Push and hold to go back to the frequency reference screen from any screen.
Use these steps to erase the parameters backed up in the keypad.
Figure 4.27 How to Erase the Backed-up Parameters
Push and hold to go back to the frequency reference screen.