YOKOGAWA ADMAG AXR - Page 35

<4. WIRING>
4-10
IM 01E30D01-01EN
NOTE
Precaution for Pulse Output
For pulse output from the DO terminal,
parameters must be set. Read Chapter 6 in this
manual.
NOTE
Precaution for Status Output and Alarm Output
For status output and alarm output from the DO
terminal, parameters must be set. Read Chapter
6 in this manual.
(3) Simultaneous Current-Pulse Output
When simultaneous output of current and pulse
output are used, no communication is possible in
some cases.
Read Table 4.6.3 or Table 4.6.6 as wiring examples.
Read(2)forspecicationsandprecautionsofthe
pulse output.
(4) The Wiring of Digital External Indicator
Using Current Output
Read Table 4.6.4 or Table 4.6.7 as wiring examples.