Zebra DS457

Standard Default Parameters A - 11
Composite TLC-39 371 F0h 73h Disable 12-80
UPC Composite Mode 344 F0h 58h Never Linked 12-81
Composite Beep Mode 398 F0h 8Eh Beep As Each Code
Type is Decoded
12-82
GS1-128 Emulation Mode for UCC/EAN
Composite Codes
427 F0h ABh Disable 12-82
2D Symbologies
PDF417 15 0Fh Enable 12-83
MicroPDF417 227 E3h Disable 12-83
Code 128 Emulation 123 7Bh Disable 12-84
Data Matrix 292 F0h 24h Enable 12-85
Data Matrix Inverse 588 F1h 4Ch DS457-SR/HD/DL:
Regular
DS457-DP:
Inverse Autodetect
12-86
Decode Mirror Images (Data Matrix
Only)
537 F1h, 19h Auto 12-87
Maxicode 294 F0h 26h Disable 12-88
QR Code 293 F0h 25h Enable 12-88
QR Inverse 587 F1h 4Bh Regular 12-89
MicroQR 573 F1h 3Dh Enable 12-90
Aztec 574 F1h 3Eh Enable 12-90
Aztec Inverse 589 F1h 4Dh Inverse Autodetect 12-91
Symbology-Specific Security Levels
Redundancy Level 78 4Eh 1 12-92
Security Level 77 4Dh 1 12-94
Intercharacter Gap Size 381 F0h 7Dh Normal 12-95
Table A-1 Standard Default Parameters Table (Continued)
Parameter
Parameter
Number
SSI Number Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.