Zebra MC33 Series User Manual

Maintanence and Troubleshooting
202
Cannot connect to
WLAN (on channels
12-13 and all 5GHz
channels).
Access Point
(AP) does not
broadcast
country code.
Disable 802.11d feature. Touch > Wi-Fi > > Additional
settings > Country Selection. A warning window pops up
indicating you must select the country in which you are using the
device. This enables all channels for the selected country even if
the AP does not broadcast country code.
When trying to open
File Browser or other
applications, the
application
automatically closes.
The Internal
Memory is full.
Connect the MC33XX to a host computer and delete files from
Internal Memory using the host computer.
Table 24 Troubleshooting the MC33XX (Continued)
Problem Cause Solution

Zebra MC33 Series Specifications

General

Connectivity	USB 2.0, Bluetooth
Touch Panel	Capacitive, glove and wet touch support
Keypad Options	Touchscreen or physical keypad
Scanning	1D/2D barcode scanning
Wireless LAN	IEEE 802.11 a/b/g/n/ac
Operating Temperature	-20° C to 50° C